In today’s increasingly scarce energy, energy conservation is everyone’s responsibility. In response to the call for energy conservation and emission reduction, many street lamp manufacturers have replaced traditional high-pressure sodium lamps with solar street lamps in urban street lamp reconstruction projects. What is the wiring sequence of the solar street lamp controller? To solve this problem, let’s introduce it in detail.
The wiring sequence of solar street lamp controller shall be:
First connect the load (negative pole) of all components, then connect the positive pole of gel battery and solar lamp, and finally connect the positive pole of solar panel.
What we should pay attention to here is that after the gel battery is connected, the idle indicator of the solar controller will be on, the discharge indicator will be on and the load will be on one minute later.
Then connect the solar panel, and the solar street lamp controller will enter the corresponding working state according to the light intensity. If the solar panel has charging current, the charging indicator of the solar controller will be on, and the solar street lamp is in charging state. At this time, the entire solar street lamp system is normal, and the wiring of the solar controller should not be changed at will. The working status of the entire solar street lamp system can be checked according to the working indicator of the solar controller.
The solar street lamp controller is divided into boost and step-down controllers. Different solar street lamp configurations, different light source wattage and different controllers. Therefore, when purchasing, we must determine the specific configuration parameters with the solar street lamp manufacturer to avoid the failure of the purchased solar street lamp due to the controller.
The above wiring sequence of solar street lamp controller is shared here, and I hope this article will be helpful to you. If there are other questions about solar street lamps that you want to know, you can leave a message on our official website, and we look forward to discussing with you!
Post time: Nov-03-2022
