In many aspects of life, we advocate going green and environmental protection, and lighting is no exception. Therefore, when choosing outdoor lighting, we should take this factor into account, so it will be more appropriate to choose solar street lamps. Solar street lamps are powered by solar energy. They are single pole and bright. Unlike city circuit lamps, some of the electric energy will be lost in the cable to save more energy. In addition, solar street lamps are generally equipped with LED light sources. Such light sources will not release carbon dioxide and other substances that have an impact on the air in the process of work, like traditional light sources, to better protect the environment. However, users need to install solar street lamps before they can use them. What are the precautions for installing solar street lamp panels? The following is an introduction to the installation of the battery panel.
Precautions for installing solar street lamp panel:
1. The solar panel shall not be installed in the shade of trees, buildings, etc. Do not close to open fire or flammable materials. The bracket for assembling the battery panel shall be able to adapt to the environmental requirements. Reliable materials shall be selected and necessary anti-corrosion treatment shall be carried out. Use reliable methods to install components. If components fall from high altitude, they will be damaged or even threaten personal safety. The components shall not be disassembled, bent or hit with hard objects to avoid trampling on the components.
2. Fix and lock the battery board assembly on the bracket with spring washer and flat washer. Ground the battery panel assembly in an appropriate manner according to the site environment and the state of the mounting bracket structure.
3. The battery panel assembly has a pair of male and female waterproof plugs. When conducting series electrical connection, the “+” pole plug of the previous assembly should be connected to the “-” pole plug of the next assembly. The output circuit shall be correctly connected to the equipment. The positive and negative poles cannot be shorted. Make sure there is no gap between the connector and the insulating connector. If there is a gap, sparks or electric shocks will occur
4. Frequently check whether the hoisting structure is loose, and retighten all parts if necessary. Check the connection of wire, ground wire and plug.
5. Always wipe the surface of the component with a soft cloth. If it is necessary to replace the components (generally not required within 20 years), they must be of the same type and model. Do not touch the moving part of the cable or connector with your hands. If necessary, use appropriate safety equipment. (Insulating tools or gloves, etc.)
6. Please cover the front surface of the module with opaque objects or materials when repairing the module, because the module will generate high voltage under the sunlight, which is very dangerous.
The above notes on installing solar street lamp panels are shared here, and I hope this article will be helpful to you. If you have any other questions about solar street lamps, you can follow our official website or leave us a message. We look forward to discussing with you!
Post time: Nov-03-2022
