Installation is an important step in the application process of LED floodlights, and it is necessary to connect wire numbers of different colors to the power supply. In the wiring process of LED floodlights, if there is a wrong connection, it is likely to cause serious electric shock. This article will introduce the wiring method for you. Friends who don’t know it can come and have a look, so as not to be unable to solve the same situation in the future.
1. Ensure that the lamps are intact
Before installing LED floodlights, in order to ensure the quality of use after installation, it is recommended to conduct a detailed inspection of the lighting products on site before installing LED floodlights, and check the appearance of LED floodlights as much as possible. No damage, whether all the accessories are complete, whether the purchase invoice is there, and after-sales service can be provided in case the lamp has quality problems, etc., and each item must be carefully checked when testing.
2. Preparations for installation
After the appearance of all lighting products is undamaged and the accessories are complete, it is necessary to make preparations for the installation of the lighting. You should first organize the installers according to the installation drawings attached to the factory, and first connect a few floodlights to try the installation drawings. Whether it is correct or not, if possible, arrange for one person to test it one by one, so as to avoid taking it to the installation site and installing it and then dismantling and replacing it if it is damaged. In addition, you need to prepare the tools needed for each link in the installation process. , material, etc.
3. Fixing and wiring
After the position of the lamp is arranged, it needs to be fixed and wired, and attention must be paid during the wiring process, because generally the floodlights are located outdoors, so the waterproof of the outdoor wiring is very important, so it is recommended It is best to recheck when fixing and wiring to ensure that the installation quality is in place.
4. Ready to light up
After the LED floodlights are fixed and wired, and ready to be turned on, it is best to use a multimeter on the main power supply to see if there are any wrong wires and short circuits, so as to ensure that even if the short-circuited floodlights are connected After turning on the power, it will not burn out. We suggest that you must do this well and don’t be lazy.
5. Check the installation quality
After all the lights are tested, try to light them up for a period of time, and then check again the next day or the third day. After doing this, everything is good, and generally there will be no problems in the future up.
The above is the installation method of the LED floodlight. If you are interested in LED floodlight, welcome to contact LED floodlight manufacturer Tianxiang to read more.
Post time: Aug-03-2023
