9 Mtr octagonal pole is more and more widely used now. The 9 Mtr octagonal pole not only brings convenience to the use of the city, but also improves the sense of safety. In this blog post, we will explore in detail what makes the 9 Mtr octagonal pole so important, as well as its application and craft. Read on to learn more and how you can make it work for your business.
Firstly, let’s briefly introduce the 9 Mtr octagonal pole.
Processing raw materials: Polar steel is selected from high-quality world, marked with low-silicon, low-carbon and high-strength Q235. Scale standards can be processed according to user requirements and equipment holders are retained. Strong wind resistance, high strength and large load.
Welding process: electric welding, flat welding, without any missing welding.
Surface treatment: galvanized and sprayed. Using degreasing, phosphating and hot-dip galvanizing process, the service life is more than 10 years. The surface is lubricated together, the color is uniform, no wear and tear.
Stereo perception: The entire pole of the 9 Mtr octagonal pole adopts a bending process. The shape and proportions meet the user’s requirements. Reasonable diameter.
Verticality check: After the vertical rod is vertical, check the verticality, the error is not more than 0.5%.
9 Mtr octagonal pole application
Octagonal poles, mainly used for the installation and fixing of customer cameras, signal lights, and traffic signs are widely used as the main purpose. The size calculation of the basic structure of the pole structure is based on the appearance shape determined by the customer and the construction parameters of the manufacturer.
9 Mtr octagonal pole craft
1. When drawing equal lines for octagonal poles and other polygonal poles, attention must be paid to the accuracy of the line size and whether the number of equal lines is correct, not too many or too few.
2. Pay attention to the angle when bending the steel plate, so that the seam overlaps tightly and evenly.
3. When welding, check whether all parts of the seaming machine are normal, especially the pressing rod and pulley. If a problem is found, it must be repaired immediately, and it must be replaced in time if it cannot be repaired.
4. Check the flux for problems. If the flux is wet, it must be dried. If the flux is polluted by oil and oxidized slag appears, the polluted part cannot be used.
5. The poles are stitched together. Check whether the quantity is correct according to the drawings. When stacking the poles, avoid the impact of the poles, and never allow the poles to be uneven due to impact.
6. Pay attention to the cleanliness of this group, turn off the power and gas valve switch when off work, and put away the tools in place.
If you are interested in 9 Mtr octagonal pole, welcome to contact 9 Mtr octagonal pole manufacturer Tianxiang to read more.
Post time: Mar-10-2023
