factory Outlets for Commercial Solar Parking Lot Lights - Auto Clean All in One Solar Street Light -Tianxiang

Description

An illumination lamp body is installed on the right side of the upper part of the lamp pole, a water collecting tank is installed on the upper end of the illumination lamp body, a booster pump is installed on the left side of the water collecting tank, the water inlet of the booster pump is connected with the water collecting tank, the water outlet of the booster pump is connected with a water outlet pipe, and the top of the water outlet pipe is connected with a spray pipe. The length of the cross bar is greater than the length of the photovoltaic panel. The spray port of the spray pipe is aligned with the light facing surface of the photovoltaic panel.

The Auto Clean All In One Solar Street Light controls the rotation of the cross bar by starting the driving motor, uses the roller brush to clean the dust accumulated on the light facing surface of the photovoltaic panel, and then turns on the booster pump to pump the rainwater in the water collection tank into the spray pipe, and then sprays it on the light facing surface of the photovoltaic panel through the spray pipe, and cooperates with the roller brush to clean the scale on the light facing surface of the photovoltaic panel. The cleaning effect is good, so that the light facing surface of the photovoltaic panel remains clean, The light utilization rate of photovoltaic panel is improved.

The Auto Clean All In One Solar Street Light is embedded between the back of the brush head on the right side of the telescopic rod and the right end of the rubber pipe, and the left end of the rubber pipe is divided into two channels, which are fixedly connected with the water storage box and the detergent box respectively. Under the control of the circuit control board, the mechanical arm is driven to fully mix the water and detergent in the water storage box and the detergent box, and finally control the brush head to brush on the light transmission plate to achieve the purpose of automatic cleaning of the street lamp, The utility model makes the whole street lamp device completely intelligent, and solves the shortcomings that the existing design street lamp is easy to accumulate dust and the workers’ cleaning work is dangerous.

Product Detail